Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Hybrid View

  1. #1
    Supporting Freak loud pipes's Avatar
    Join Date
    09-30-2014
    Location
    Ohio
    Posts
    351
    Great thread. Thank you for taking the time to put this together!


    Sent from my iPhone using Tapatalk
    2012 COD MW3, #1627/3500 (Negra Modelo)
    2006 Mustang GT Convertible Premium
    2007 Harley Street Glide

  2. #2
    New JK Freak
    Join Date
    01-13-2015
    Location
    Arkansas
    Posts
    1
    I am adding wheels/tires to my 2012 JKU with a 2.5" AEV lift. I am going with 35x12.50x20. I am going to install Fuel Hostage wheels. The -24 is 4.5" backspace and the -12 is 5" backspace. The wheel shop I am thinking about using does not have the -24's but wants to install the -12's and said it will not be a problem. What is your opinion? This goes counter to all the threads I have read.

  3. #3
    New JK Freak
    Join Date
    03-04-2015
    Location
    Troy, NC
    Posts
    3
    I am new to the forum and have found a lot of great info.

    I have a 2011 4door unlimited Sahara with a 2.5 inch lift and have been told that I could run a BFG 275/70R18 on the 18x9 XD Rockstar II's with 30mm offset with no rubbing and the rubber will be inside the fenders...is this correct?

    Will the 275/70R18 tires rub?
    Will the 18x9 with 30mm offset keep the wheels inside the fender to prevent road grim and rock blowback on the jeep?
    How will this look and or opinions?

    Thanks guys!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •