A Repository for Jeep Systems Override/Disable Procedures

[Res6cue]

This is a great thread and I'm glad you made it a sticky. Any word on disabling the horn when you lock the Jeep? I'm looking at adding a horn from a semi and the horn on lock has kept me from doing it so far. Also, how do you disable the light flash on lock and unlock?

In your owners manual there are instructions on how to do this. For my '09 it was done by pushing a combination of buttons on the key. I would post the steps if I still had the owners manual.

For my '12 & '13 it is done from the menu in the speedometer under Personal Settings. Use the buttons on the steering wheel to scroll the menu.

Never Forget 343
PTB-EGH

[Hook-em]

This is a great thread and I'm glad you made it a sticky. Any word on disabling the horn when you lock the Jeep? I'm looking at adding a horn from a semi and the horn on lock has kept me from doing it so far. Also, how do you disable the light flash on lock and unlock?

I've got a 2009 and will look in my owners manual for this and pay it.

Sent from the Matrix

[mdfinest]

Subscribed

[Hook-em]

This is a great thread and I'm glad you made it a sticky. Any word on disabling the horn when you lock the Jeep? I'm looking at adding a horn from a semi and the horn on lock has kept me from doing it so far. Also, how do you disable the light flash on lock and unlock?

As promised, here is the horn disable procedure for the alarm.

If desired, the “Sound Horn On Lock” feature can be turned on or off using the following steps:

1. Press the RKE transmitter LOCK button for 4 to 10 seconds.
2. While the LOCK button is pressed (after four seconds), press the RKE transmitter PANIC button. Release both buttons.

The “Sound Horn On Lock” feature can be reactivated by repeating this procedure.

This is found on page 21 of the 2009 owner's manual. Also, the owner's manual can be downloaded for any year JK at the link provided below. Just select the year and the model from the drop down lists on the page and you will get a PDF version of the manual.

JK Owner's Manual Link

[Summertime Boss]

In your owners manual there are instructions on how to do this. For my '09 it was done by pushing a combination of buttons on the key. I would post the steps if I still had the owners manual.

For my '12 & '13 it is done from the menu in the speedometer under Personal Settings. Use the buttons on the steering wheel to scroll the menu.

Never Forget 343
PTB-EGH

As promised, here is the horn disable procedure for the alarm.

This is found on page 21 of the 2009 owner's manual. Also, the owner's manual can be downloaded for any year JK at the link provided below. Just select the year and the model from the drop down lists on the page and you will get a PDF version of the manual.

JK Owner's Manual Link

Thanks Res6cue and Hook-em. I will turn off the horn today. Now its time to get online and find that semi horn...

[DeepSeaJK]

Bump! Great thread, thanks!

[JanLWranglerS]

Will this work on the 2012 wrangler

Lou

[Res6cue]

Not positive about the '12 but I am pretty sure that you can turn the horn off from the 'personal settings' located by pushing the button on your Speedometer. That is how I did it on my 2013.

Never Forget 343
PTB-EGH

[Hook-em]

I think all of these are in the manual. You can always look there for your model.

Sent from the Matrix

[Buddhacon]

This is good info, I knew about the oil light. We missed the seat belt chime though.

1) Turn the ignition on (do not start)
2) Buckle and unbuckle the seat belt (driver's) 3 times within 10 seconds
3) Turn off the ignition.

Your seatbelt buzzer should be disabled, but you'll still get the light on the dash.
Please remember to always use your seatbelt.

Just did this hope it works on my 13