PDA

View Full Version : sams jk build thread



samuelvtt
09-16-2014, 10:23 PM
hey guy Im a long time reader of this forum but this is my first post. just to let you know I speak french so its a little hard for me to write correctly so please correct me when I do mistake! I'm 17 years old and the 20 january 2014 my order show up a brand new flame red jk 2dr. http://img.tapatalk.com/d/14/09/17/ybahahur.jpg
3 hours after duratracs where on http://img.tapatalk.com/d/14/09/17/5aha6ada.jpg
some nice 285/75r16 I could not believe how much they changed the looks

samuelvtt
09-16-2014, 10:43 PM
after trying the stock flexhttp://img.tapatalk.com/d/14/09/17/amateru5.jpg
and pulling the top down when its -30 outside http://img.tapatalk.com/d/14/09/17/uba6agar.jpg
I decided that the jeep needs quick disco so I made some but did not take picture. I where very surprised by the stock flex disconnectedhttp://img.tapatalk.com/d/14/09/17/hutu9u6a.jpg
then like an idiot I tried to pass in a lot too much snow http://img.tapatalk.com/d/14/09/17/7ytyhanu.jpg
next I started to build my rock slider http://img.tapatalk.com/d/14/09/17/udupejyd.jpg http://img.tapatalk.com/d/14/09/17/4yjupe7e.jpg
http://img.tapatalk.com/d/14/09/17/y2ydy6yv.jpghttp://img.tapatalk.com/d/14/09/17/u5u2e8aq.jpg
I managed to get stuck twice in a week http://img.tapatalk.com/d/14/09/17/rede6epy.jpg
http://img.tapatalk.com/d/14/09/17/u5u8umag.jpg
after paint http://img.tapatalk.com/d/14/09/17/amany9ev.jpg need a hitch? build one http://img.tapatalk.com/d/14/09/17/e5evasy7.jpg starting some front bumper prototype http://img.tapatalk.com/d/14/09/17/5apezytu.jpg

shootnjunky
09-17-2014, 02:10 AM
Looks good keep it up


Sent from my iPad using Tapatalk

tslewisz
09-17-2014, 02:27 AM
Yep, looking good. I love your build rather than buy attitude.

Sent via mobile. The usual disclaimers apply.

samuelvtt
09-17-2014, 08:11 AM
tanks guy ! looking for departure and approach angle ahahahhttp://img.tapatalk.com/d/14/09/17/hazedape.jpg
first time doorless need a mirror
http://img.tapatalk.com/d/14/09/17/aseby2es.jpg
I modified my atv mirror anyway I never used it.
http://img.tapatalk.com/d/14/09/17/hasedapu.jpg
a pallet full of fun
http://img.tapatalk.com/d/14/09/17/u7u7u4e4.jpg
starting to look like somethinghttp://img.tapatalk.com/d/14/09/17/u6y5e6eh.jpg
http://img.tapatalk.com/d/14/09/17/6u2yqyza.jpg
It should be solid ahahah
http://img.tapatalk.com/d/14/09/17/subuvema.jpg
painted because police dont like my bumperless jeep.....http://img.tapatalk.com/d/14/09/17/gatu3yqe.jpg
NEVER buy a f@&$!$& harbor freight pipe bender this is with sand torch heated those dom tube are solid as hell ( in the back ground we see that I were obliged to weld the tube together
http://img.tapatalk.com/d/14/09/17/za5u4apy.jpg
some will say that the bar is too long but I know what im doing you will see
http://img.tapatalk.com/d/14/09/17/vuvyjepa.jpg
testing the rock slider for the first time. they held up great. note on the picture they do not touch the rock but after the picture was tanken they scraped the rock on like 8 inch hahahaahah
http://img.tapatalk.com/d/14/09/17/yby3u5ap.jpg
I made a spare tire delete plate its ugly as hell but the spare cant be on when taking mesure for my rear bumper
http://img.tapatalk.com/d/14/09/17/da6a4a8y.jpg

Ringer
09-17-2014, 08:41 AM
Looking good. Nice fab work! Makes me wish I had a plasma table to make this stuff easier. Good color choice too.

samuelvtt
09-17-2014, 04:56 PM
Looking good. Nice fab work! Makes me wish I had a plasma table to make this stuff easier. Good color choice too.

thanks I love your build man you got some awesome skills . I don't have a plasma table the plate are laser cut by a company that can cut any steel plate that you can imagine and on top of that the price off steel is ridiculous. but I will have one in a couple of month 😀

samuelvtt
09-17-2014, 11:15 PM
then I say to myself why not be really unique by placing switch next to the traction control switch http://img.tapatalk.com/d/14/09/18/ty2azamu.jpg I wont lie I do NOT recommend anybody to do this because first its really hard and time consuming to do this secone the result look good but the switch arent so accessible with a manual and third at night you are trying to find the switch like an idiot and you accidentally blind people behind you with your back up light. I will probably made an overhead console soon so those switch will get out of here .
http://img.tapatalk.com/d/14/09/18/a5yrehe3.jpg
this is what the switch a wired to a home made spod the max amp that can pass there is 120 amp but before I try this max load I think I will need to put one or tow fan in this box XD
http://img.tapatalk.com/d/14/09/18/u2eda9yb.jpg
I hate carpet so I take it off sand down the tub and bed lined it whit monsta liner. awesome product but you beed to roll it THICK if you want it to protect your jeep floor for a long time
http://img.tapatalk.com/d/14/09/18/tygaduby.jpg
http://img.tapatalk.com/d/14/09/18/mehyra3e.jpg
http://img.tapatalk.com/d/14/09/18/yzu4arad.jpg
if it werent of the cops I would drive with this every day !
http://img.tapatalk.com/d/14/09/18/y7enuqeb.jpg
tow 100w kc long range to compensate for the stock candle
http://img.tapatalk.com/d/14/09/18/tusyvape.jpg
first real scratch thats what happen when you wheel at night in tight trail....
http://img.tapatalk.com/d/14/09/18/yza8y2y6.jpg
skids and bumper gussets for the winch
http://img.tapatalk.com/d/14/09/18/4aju7emu.jpg
the winch an we see the "spod" under the hood
http://img.tapatalk.com/d/14/09/18/yrevavu9.jpg
this summer I started to build my rock crawling trail because here everybody do mud but I hate mud . with a tractor and an excavator its not so long that we have a nice trail ahahahah
http://img.tapatalk.com/d/14/09/18/u5uby3ug.jpg
a friend buy himself a jeep pretty much identical to mine red 2 door jk soft top but with the 17" wheel
http://img.tapatalk.com/d/14/09/18/evugajyv.jpg
I made a laser cut tramp stamp but forgot to ask it in 1/8 got it in 3/16 so I gave it to my friend
http://img.tapatalk.com/d/14/09/18/tutu2eny.jpg
then I started to draw my rear bumper
http://img.tapatalk.com/d/14/09/18/etema6ar.jpg
so i'm now here schools started a lot less time will be put on the jeep but as much as i can !
http://img.tapatalk.com/d/14/09/18/dana2eta.jpg
after school drilled the exhaust skid and welded a bracket on it http://img.tapatalk.com/d/14/09/18/4a3atypy.jpg
what a nice view!
http://img.tapatalk.com/d/14/09/18/su5yty3y.jpg

klankster
09-21-2014, 02:57 PM
Looks awesome! It's cool how you're building everything yourself. I wish I knew how to use a CAD program an draw stuff up on the computer haha.

samuelvtt
09-26-2014, 08:01 AM
Looks awesome! It's cool how you're building everything yourself. I wish I knew how to use a CAD program an draw stuff up on the computer haha.

thanks I love to know how to draw on these program I started on google sketchup then on autocad and now I'm on solidworks. Its incredible how fast you can make anything you want ahahah.

ECHO
09-26-2014, 11:27 AM
Great looking build you have going on .. Great Job!

Senayski
09-26-2014, 12:05 PM
Damn lol. I suck, you rule!

LloydChristmas
09-29-2014, 08:00 PM
Very nice, wish I had your fab skills (and tools).

TW CODMW3
09-29-2014, 08:27 PM
Keep it up. You are doing a fantastic job.

samuelvtt
09-30-2014, 08:02 AM
thanks guys. I try to work as much as possible on the jeep but this weekend I wheeled it hard ahahaha it was muddy but awesome http://img.tapatalk.com/d/14/09/30/5a8ahu9e.jpghttp://img.tapatalk.com/d/14/09/30/tyvatuty.jpghttp://img.tapatalk.com/d/14/09/30/mu9utuhu.jpg when I realized that it where just the boot of the stabilizer I were really happy http://img.tapatalk.com/d/14/09/30/za2u9y2e.jpg

samuelvtt
12-09-2014, 09:44 AM
I started working on my rear bumper , had to do some trimming but now it fit perfectly 49550 next I have to weld it weld brace inside and add d ring mount and finally start a tire carrier I need to find a bering unit that will support all this weight.49551

GreyGoose
12-11-2014, 10:50 PM
Awesome build !!! Looks great